Hyperoptic Router Login

You can modify your WiFi password, network name (SSID), and the default Hyperhub router settings by visiting the Hyperoptic WebGUI Login Page at http://192.168.1.1.

Login to 192.168.1.1

What is the Hyperoptic router login process?

1. In the address bar of a browser, type 192.168.1.1.
2. Click Login after entering your password and username, admin.
3. The Hyperoptic WebGUI will be the one to which you are logged.

Note: The password is posted on a sticker on the router’s back, and the default username is admin.

You must first connect your device to the router’s Wi-Fi network in order to log in.

How can I modify my Hyperoptic WiFi SSID and password?

Choose your Hyperhub router:

• H298A ZTE
• H298N ZTE
• HG2381 Tilgin
• The Nokia HA-140W-B
• The ZTE H3600

H298A ZTE

1. Access the router’s settings by logging in.
2. Click Local Network > WLAN > WLAN Basic > WLAN SSID Configuration.
   
3. In the SSID Name field, type the name of the Wi-Fi network.
4. In the WPA Passphrase area, type the Wi-Fi password.
5. Press “Apply.”

The 2.4GHz and 5GHz Wi-Fi settings must be set up independently.

H298N ZTE

1. Access the router’s settings by logging in.
2. Navigate to Network > WLAN > SSID Settings.
   
3. Click Submit after entering the Wi-Fi Network Name in the SSID Name area.
4. Navigate to Network > WLAN > Security.
   
5. Click Submit after entering the Wi-Fi Password in the WPA Passphrase area.

HG2381 Tilgin

1. Access the router’s settings by logging in.
2. Navigate to Wireless and click on SSID (for example Tilgin_HG2381_24G) in the Existing SSIDs section and select Configuration.
   
3. Enter the Wi-Fi Network Name in the Name field and click Apply.
   
4. Navigate to SSID > Security.
   
5. Click Apply after entering the Wi-Fi Password in the Passphrase area.

The Nokia HA-140W-B

1. Access the router’s settings by logging in.
2. Go to Network > Wireless (2.4GHz) or Wireless (5GHz).
   
3. In the SSID Name field, type the name of the Wi-Fi network.
4. In the WPA Key area, type the Wi-Fi password.
5. Click “Save.”

The ZTE H3600

1. Access the router’s settings by logging in.
2. Click Local Network > WLAN > WLAN Basic > WLAN SSID Configuration.
   
3. In the SSID Name field, type the name of the Wi-Fi network.
4. In the WPA Passphrase area, type the Wi-Fi password.
5. Press “Apply.”